MAPP GAS
Mapp Gas IZETROM is used in air combustion for brazing and soldering, where it has a slight advantage over competing propane fuel due to its higher combustion temperature of 2020°C (3670°F) in air.
Plumbers, refrigeration and HVAC engineers, and other tradespeople also value the high heat capacity of Mapp Gas’s flame. It is sold in small to medium-sized containers. Blowtorches are used for browning foods cooked using sous-vide techniques.
Presentations:
400 g / 14.1 oz / Box of 12 units.
BEFORE USE
Use only with torches designed for MAPP GAS.
Check the cylinder and torch seals. Never use with damaged seals. / Keep away from sparks or other ignition sources. They may ignite leaking gas. / Hand-tighten. Overtightening may damage the seals. / Check for leaks with soapy water. If leaks are detected, do not use. / Follow the instructions on the cylinder and torch.
AFTER USE
Allow to cool, and unplug the torch when not in use / Disconnect pilot lights and other ignition sources, which may ignite leaking gas / Replace the cap to keep the valve clean / Do not attempt to refill cylinders.
STORAGE
Store in a cool, dry, and well-ventilated area below 120°F.
Produces carbon monoxide. CO is invisible, odorless, toxic, and flammable. If you experience headaches, drowsiness, or nausea, turn off the unit and get fresh air quickly. Post «No Smoking» signs in storage and use areas.
FORMULA
- Propylene, Propane..
- Ingredient CAS Code EINECS Code Weight %
- Propylene 115-07-1 204-062-1 5-100
- Propane 74-98-6 200-827-9 0-0.5
- ONU 1077
PROPERTIES
MAPP has an energy content of 2,100 BTU/lb (1.357 kWh/kg) / Flash point: -162°F / -108°C
Autoignition: 927°F / 497°C / Lower explosion limit: 2.0% by volume in air / Upper explosion limit: 11.0% by volume in air / Fire hazards: Vapors are heavier than air and can travel long distances to an ignition point.
IZETROM INDUSTRY AND TRADE LIMITED
Quality products for home,
commerce, and industry.
Download our catalog
Suscribe to our updates
We are strategic partners of your proyects